AS Country Stone Zubehör Kleber

500+ Sold

Gecko Hybrid POP 310 ml

The Gecko Hybrid POP is ideally suited for the attachment of all our products on non-absorbent surfaces or outdoors. Apply the adhesive selectively on the backside of the panel and then press the panel onto the wall. One cartridge is sufficient for an area of approx. 2 m². The adhesive is applied with a Caulking Gun Press.Further product characteristics:solvent-free high initial adhesion ideal adhesive poweradherence correctable for approx. 20 minutes consumption: one cartridge for an area of approx. 2 m²

Content: 310 ml (€6.45* / 100 ml)

€19.99*

Variants

Rigid foam adhesive

Content: 14 kg

Only the best for your walls: The PUFAS rigid foam adhesive is ideally suited for the application of our polystyrene panels and our marble and granite look wall panels for indoor use. The adhesive is available in four different packaging sizes (1 kg, 4 kg, 8 kg, 14 kg).The adhesive is ready-to-use from the bucket and can be spread directly on the back of the panel or on the wall using a notched trowel. Simply press the panels evenly to have your new panels perfectly placed on the wall. Make sure to keep the subsurface absorbent, dry and clean before applying the panels. Additionally, you should apply a foundation as a pretreatment if necessary.Further product characteristics:solvent-freehigh initial adhesionoptimal adhesive powerresistant to damp spacesconsumption: 1 kg adhesive for an area of 1.5 m²

Content: 14 kg (€2.79* / 1 kg)

Variants from €19.99*

€38.99*

Variants

Rigid foam adhesive

Content: 4 kg

Content: 4 kg (€5.00* / 1 kg)

€19.99*

Variants

Rigid foam adhesive

Content: 8 kg

Content: 8 kg (€3.62* / 1 kg)

Variants from €19.99*

€28.99*

MS-Flex Sealant and Construction Adhesive 300 ml

Content: 300 mlOur recommendation for the installation of natural stone wallpapers: polymer-based MS-Flex Sealant and Construction Adhesive. The adhesive can be used both indoors and outdoors, and even in the bathroom. To hang the wallpaper, the adhesive must be applied and spread evenly on the back of the wallpaper via a notched trowel (for example with our notched trowel B11 180 mm). Subsequently, the wallpaper can be attached to the respective surface, pressed on and grouted. The surface must be free from grease, intact and clean.Further product characteristics:✔ Basis: MS-Polymer✔ Processible: from +5 °C to max. +40 °C✔ Temperature: from -40 °C to +90 °C✔ Skin formation time: approx. 10 to 15 min. under standard condition✔ Hardening time: approx. 2 mm/24 hours depending on the temperature✔ Density: 1,5 g/cm³✔ Shore A hardness: approx. 60 stretching ability

Content: 300 ml (€4.97* / 100 ml)

€14.90*

Gecko Hybrid POP 310 ml

Content: 310 ml (€2.58* / 100 ml)

€7.99*

Beko Silikon Schwarz 310ml

Der Beko Silikon Kleber eignet sich hervorragend für vielseitige Anwendungen im Innen- und Außenbereich. Er kann punktuell oder flächig aufgetragen werden und sorgt für eine dauerhafte, elastische und sichere Verklebung auf verschiedensten Untergründen. Mit einer handelsüblichen Kartuschenpresse lässt er sich einfach verarbeiten und bietet dabei eine starke Haftung sowohl im Bau- als auch im Sanitärbereich. Weitere Produkteigenschaften: ✔ neutralvernetzend, geruchsarm und sehr emissionsarm ✔ hohe Anfangshaftung und optimale Klebkraft ✔ UV- und witterungsbeständig ✔ dauerelastisch und abriebfest ✔ fungizid ausgerüstet (pilzhemmend) – ideal für Feuchträume ✔ universell einsetzbar, auch für Naturstein geeignet ✔ temperaturbeständig von -50 °C bis +180 °C (kurzzeitig bis +220 °C) ✔ Verbrauch: 1 Kartusche reicht für ca. 12–15 laufende Meter (bei 5x5 mm Fuge)